GENERAL
Operation: Unmanaged, store and forward, wire-speed switching, non-blocking
Modes: Full or half duplex operation with flow control supported on all ports
Support: All IEEE 802.3 compliant devices and protocols are supported
Ethernet compliance
IEEE 802.3af (Power over Ethernet)
IEEE 802.3 (10Mbps Ethernet for legacy devices)
IEEE 802.3u (100Mbps Ethernet for newer devices)
IEEE 802.3x (Full-Duplex with Flow Control)
MAC addresses: 1024
Memory bandwidth: 3.2 Gbps
Latency (typical): 5 us for 100 Mbps and 16 us for 10 Mbps (plus frame time)
Ethernet isolation: 1500 Vrms 1 minute
RJ45 COPPER PORTS
RJ45 ports: Up to five RJ45 ports that are fully IEEE 802.3 compliant; four of these are PoE (PSE) and fully
802.3af compliant
RJ45 speed & duplex: 10/100 auto-detecting for speed & duplex (full or half)
RJ45 MDI/MDIX: Auto-mdi/mdix-crossover automatically supports either straight or crossed cables
RJ45 Polarity: Auto-polarity for automatic correction of crossed TXD and RXD pairs
FIBER OPTIC PORTS
One optional 100 Mbps fiber optic port for distances
up to 120km
Transceivers: SC or ST style
Multimode: Links up to 4 km typical; 1310 nm; use with 50 or 62.5/125 um fiber
Transmitter power (dB): -21 min, -17 typ, -14 max
Receiver sensitivity (dB): -34 typ, -31 max
Singlemode: Links up to 20 km typical; 1310 nm; use with 9 or 10/125 um fiber
Transmitter power (dB): -15 min, -11 typ, -8 max
Receiver sensitivity (dB): -36 typ, -31 max
Singlemode LongHaul: Links up to 40 km typical; 1310 nm; use with 9 or 10/125 um fiber
Transmitter power (dB): -5 min, -3 typ, -0 max
(special order)
Receiver sensitivity (dB): -36 typ, -34 max
(special order)
Longer distances: Contact SIXNET for distances up to 120 km
Eye safety: IEC60825-1, Class 1; FDA 21 CFR 1040.10
and 1040.11
POWER INPUT
Redundancy: Dual power input terminals with reverse polarity protection
Power input: 10-30 VDC with no PoE output; 45-56 VDC for PoE output
Switch Power Consumption
2.0 W (5-port without fiber) + PoE
3.0 W (5-port with 1 fiber) + PoE
Typical for all ports to be active at 100 Mbps
PoE Power consumption: Up to 15.4 W per port
Transient protection: 15,000 watts peak
Spike protection: 5,000 watts (10 times for 10 uS)
PoE OUTPUT
PoE compliance: 100% IEEE 802.3af compliant
PoE classification: PSE (Power Sourcing Equipment)
PoE voltage: 45 to 48 VDC depending on power input
PoE power: Up to 15.4 watts per channel
PoE RJ45: pin assignments TX/V- (3, 6); RX/V+ (1, 2)
PoE operation: automatic detection and
power management
PoE disconnect mode: DC disconnect
PoE protection: over-temperature, over-current, over/under-voltage and transient
ENVIRONMENTAL
Operating temperature: -40 to 75°C (cold startup @ -40)
Storage temperature: -40 to 85°C
Humidity: 5 to 95% RH (non-condensing)
Vibration: IEC68-2-6
Shock: IEC68-2-27
Freefall: IEC68-2-32
STANDARDS & CERTIFICATIONS
Electrical safety: UL508 / CSA C22.2/14 per CUL; EN61010-1
EMC: FCC part 15 / ICES-003; EN55022 / IEC61326-1
Hazardous locations: UL1604, CSA C22.2/213 per CUL (Class I, Div. 2, Groups A, B, C, D); ATEX / Cenelec (Zone 2)
MTBF Mean Time Between Failure: >1,000,000 hours
RoHS and WEEE: RoHS (Pb free) and WEEE compliant
ISO9001:2000: Certified "Total Quality" company
Industrial Warranty: 3 years with product registration
MECHANICAL
Slim line case, ideal for DIN rail mounting
Material: Corrosion-proof polycarbonate plastic
Protection: IP30 protection from dust and debris
DIN rail mounting or direct to panel (no optional kits or accessories required)
Dimensions: 1.0" x 4" x 3.3" (2.5 x 10.0 x 8.3 cm)
Weight: 4 oz. (0.11 kg)
All specifications are subject to change. Consult factory for latest info
