Industrial Power over Ethernet (PoE) Injectors

The EB-PSE-24V-1 or EB-PSE-48V-2 industrial PoE power injectors add 48 VDC power into 1 or 2 Ethernet ports so that you can pass power and data over the same wire to your Ethernet devices in the field. The 24V-1 model steps up your 24 VDC for sourcing 1 PoE port so no separate DC/DC converter is required. The 48V-2 model is two injectors in one to save space and money. Both are ultra-rugged, reliable and easy to use.

• PERFORMANCE SPECIFICATIONS
• Ethernet protocols supported all IEEE 802.3
• Ethernet connectors per channel 2 (1 for Ethernet in, 1 for PoE out)
• Ethernet port standards 10/100BaseTX IEEE 802.3 / 802.3u
• PoE OUTPUT
• Fully IEEE 802.3af compliant
• IEEE 802.3af PoE operation Power Sourcing Equipment (PSE)
• PoE power output 48 VDC @ 15.4 Watts per channel (24V model: Derate 1W per 2°C over 60°C)
• RJ45 PoE pin assignments (A=unused pair; B=signal pair)
• A: TX(3,6); RX(1,2); V-(7,8); V+(4,5)
• B: TX/V- (3, 6); RX/V+ (1, 2)
• PoE operation auto-detection & power management
• PoE disconnect mode AC for 24V-1 and DC for 48V-2
• PoE protection over-temp, over-current, over/under-voltage & transient
• Power Input fully IEEE 802.3af PoE compliant
• Power input for 48V-2 models 45-56 VDC @ 31 Watts max.
• Power input for 24V-1 models 18-30 VDC @ 20 Watts max.
• PoE transient protection 15,000 watts peak
• PoE spike protection 5,000 watts (10 times for 10 uS)
• ENVIRONMENTAL
• Operating temperature range -40 to +75 °C (cold startup @ -40) (24V model: Derate 1W per 2°C over 60°C)
• Storage temperature range -40 to +85 °C
• Humidity (non-condensing) 5 to 95% RH
• Vibration, shock and freefall IEC68-2-6, -27 and -32
• Electrical safety UL508 / CSA C22.2/14 (CUL); EN61010-1
• EMC emissions and immunity FCC Part 15 / ICES-003; EN55022 / IEC61326-1
• Hazardous locations UL1604 / CSA C22.2/213 (CUL), C1, D2; ATEX / Cenelec Zone 2
• MECHANICAL
• DIN rail or direct to panel mounting
• Packaging material and protection Polycarbonate with IP30 protection
• Dimensions (H x W x D) 4 x 1 x 3.3” (10 x 2.5 x 8.3 cm)
• Weight approximate 0.17 Kg (0.25 lbs)
• MTBF estimated >1,000,000 hours
• Specifications are subject to change. Consult factory for latest information.